Olympus NDT manufactures ultrasonic transducers for applications as diverse as flaw detection, thickness gaging, materials research and medical diagnostics. We have developed more than 4,000 transducer types consisting of both standard catalog units and special designs. Over the years, we have been in the forefront of ultrasonic technology, introducing innovative products and solving difficult application problems.
|
Immersion Transducers
IImmersion transducers are specifically designed to test parts that are immersed in water, or through sound coupling via a water column, which allows uniform and fast coupling for rapid scanning of parts.
>
i-1 and i-2 Style Housings
0.25 inch (6 mm) diameter elements with 0.375 inch (10 mm) housings for difficult-to-reach fillet or bore areas are available with straight Microdot (I-1) or straight UHF (I-2) connectors and 303 stainless steel housings.
>
i-3 Style Housings
0.25 inch (6mm), 0.375 inch (10 mm) and 0.50 inch (13 mm) element diameters in 0.63 inch (16 mm) housings with straight UHF connectors and 303 stainless steel case housings.
>
i-R Style Housings
.50 inch (10 mm) element diameters in 0.75 inch (19 mm) x 0.75 inch (19 mm) rectangular housings with side mount (right angle) UHF connectors and 303 stainless steel case housings.
>
i-4, i-7 and i-8 Style Housings
Various element and case sizes with straight UHF connectors and 303 stainless steel case housings are available.
>
Sub-Miniature and Ultra-Miniature Angle Beam Transducers
The sub-miniature (HS-225) and ultra-miniature (HS-877) angle beam transducers are supplied in frequencies from 2.25 to 10.0 MHz with angles from 45° through 90°.
|
>
Integral Angle Beam Transducers
Miniature potted angle beam transducers provide an excellent balance between size and performance by utilizing integral angle beam shear wave wedges. Overall size and footprint are reduced compared to a screw-in style transducer and wedge, with little or no sacrifice in performance.
>
Spot Weld Transducers
These transducer designs are popular for spot weld inspection. Each has distinctive advantages. Common features among these styles are small diameter (3 mm to 6 mm) and high frequency (10 MHz to 20 MHz).
>
Dry Coupled Contact and Roller Transducers
Dry coupled transducers can be used for flaw detection and thickness measurement in many smooth metallic or non-metallic materials. Roller transducers are typically used in testing smooth metallic or non-metallic materials for laminar cracking or disbonding.
>
Pencil Transducers
These high frequency focused delay line transducers are compatible with any ultrasonic instrument capable of displaying a return echo at depths as low as .010 inches in steel.
Special Transducers
In addition to the transducers listed in this catalog, Olympus NDT continues to manufacture past "standard" Harisonic transducers upon request. This includes many of the past Harisonic Contact, angle beam, dual & other lines. Also still available are the Qualcorp / Automation industries line of transducers as well as the Nortec line.
|