|
Olympus NDT offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications.
The Panametrics-NDT Microscan transducers are frequently used with the Series 25 and Series 35 thickness gages, as well as other commercially available thickness gages, flaw detectors and ultrasonic instrumentation.
Microscan transducer part numbers reflect the connector designation:
RM = Right Angle Microdot®
SM = Straight Microdot
RB = Right Angle BNC
SB = Straight BNC
SU = Straight UHF
When selecting a transducer, please review the chart below or consult the Transducer Frequency Range in the Instruction Manual that was shipped with your gage.
|
Thickness Gage Model
|
Transducer Frequency Range
|
|
35, 35DL
25, 25DL
25DL PLUS
25MULTI PLUS
|
2.0 to 30 MHz |
|
35HP, 35DL-HP
25HP PLUS
25HPV
|
0.5 to 5.0 MHz |
Contact Transducers
One of the advantages of a Panametrics-NDT Microscan contact transducer is its versatility; a single transducer can cover a broad thickness range in many engineering materials. Contact transducers are constructed with the unique WC-5 wearplate for greater durability and a longer life.
Frequency
(MHz)
|
Element
inches
|
Diameter
mm
|
Transducer
Part Number
| | 0.5 | 1 | 25 | M101-SB | | 1 | 1 | 25 | M102-SB | | 1 | 0.5 | 13 | M103-SB | | 2.25 | 0.5 | 13 | M106-RM, M106-SM | | 2.25 | 0.5 | 13 | M1036† | | 5 | 0.5 | 13 | M109-RM, M109-SM | | 5 | 0.25 | 6 | M110-RM , M110-SM, M110H-RM** | | 10 | 0.25 | 6 | M112-RM, M112-SM, M112H-RM** | | 10 | 0.125 | 3 | M1016-RM | | 20 | 0.125 | 3 | M116-RM, M116-SM | | 20 | 0.125 | 3 | M116H-RM* |
RM = Right Angle Microdot; SM = Straight Microdot; SB = Straight BNC
†High Penetration Transducer *Use with Holder, P/N 2133 **Use with Holder, P/N 2132
SONOPEN® Transducers
The Sonopen® transducer has a replaceable delay line that is tapered to a small contact area. This transducer makes reliable thickness measurements in applications such as turbine blades, threads on plastic bottle necks and tight radii on plastic containers. High-temperature Sonopen delay lines are also available.
|
Frequency
|
Nominal
Element
Size
|
Transducer
Part Numbers
| |
MHz
|
inches
|
mm
|
Straight
Handle
|
Right Angle
Handle
|
45°
Handle
| |
15
|
0.125
|
3
|
V260-SM
|
V260-RM
|
V260-45
|
|
Tip diameter
| | | inches | mm | Part Number | | 0.08 | 2 | DLP-3 | | 0.06 | 1.5 |
|