Foros de discusión de END

The goal of this educational Forum is to foster constructive discussions on Applications and Technologies related to nondestructive testing (NDT).

If you have a Service or Repair question related to our products, please call (1) 781-419-3900 or 877-225-8380 toll free (North America), or send an e-mail to customer.service@olympusNDT.com. You may also click here to locate a service center near you. : http://www.olympusndt.com/en/service-and-support/service-centers/

Forum Home  / General Topics  / NDT Discussion

Home | Search

Author	Post ReplyQuote
HCUMBAA Joined: 14 jul 2005 Posts: 6 Location: Biloxi Ms.	Posted on mié abr 09, 2008 07:37   Post Subject: Gate Settings Quote can someone tell me about a reference standard that quotes where the gate settings should be I know 40% AND 80% are industrial standards but is there a code that states this ?
Michael Moles Joined: 07 may 2004 Posts: 12 Location:	Posted on mié abr 09, 2008 12:50   Post Subject: RE: Gate Settings Quote There are a number of standards and codes which require a stated reference level, but some don't specify which level. If you want a standard that specifically states the refernce level, try ASTM E-1961 for pipeline AUT, which specifies both 40% and 80%. Michael