Shortened dead zone at both ends (1.5 mm between center of first or last element and housing edge)
Well suited for composite channel inspection
Used for C-scan inspection of composites (delamination, disbonding, and porosity)

Probe Specifications and Dimensions

Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active aperture (mm)	Elevation (mm)	External dimensions mm (in.)
Part number	Frequency (MHz)	Number of elements	Pitch (mm)	Active aperture (mm)	Elevation (mm)	L	W	H
Small-footprint probes
10L16-A00	10.0	16	0.31	5.0	5.0	8 (0.31)	8 (0.31)	23 (0.90)
5L10-A0-SIDE	5.0	10	0.60	6.0	6.0	13 (0.50)	10 (0.40)	23 (0.90)
5L10-A0-TOP	5.0	10	0.60	6.0	6.0	13 (0.50)	10 (0.40)	23 (0.90)
10L10-A0-SIDE	10.0	10	0.60	6.0	6.0	13 (0.50)	10 (0.40)	23 (0.90)
10L10-A0-TOP	10.0	10	0.60	6.0	6.0	13 (0.50)	10 (0.40)	23 (0.90)
Near-wall probes
3.5L64-NW1	3.5	64	1.0	64.0	7.0	66 (2.60)	19 (0.75)	25 (0.98)
5L64-NW1	5.0	64	1.0	64.0	7.0	66 (2.60)	19 (0.75)	25 (0.98)
These probes come standard with an OmniScan® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. Note: Dimensions listed herein are approximate and are not to be used for design purposes.

Información complementaria

¿Preguntas?