HSMT-X03 Scanner

Pre-Service Weld Inspection Manual Scanner

The R/D Tech® HSMT-X03 offers an efficient way to make a complete manual weld inspection. It can perform TOFD, pulse-echo, and phased array inspection separately or all at once.

The basic configuation is intended for construction welding inspection. In order to be used in more restricted areas, the scanner can also be reconfigured with the provided short frame bars.

Features

• Compact and versatile. The provided frame bars allow size customization.
• Full range of pulse-echo and TOFD probes and wedges, including the composite CentraScan™ series
• Can support up to 8 conventional or phased array probes.
• The four magnetic wheels can rotate 90º to allow scans in both directions
• Light aluminum frame
• Fully adjustable probe positions
• Metric/English rulers on the scanner frame for easy probe-separation measurement
• Probe holders are independently spring-loaded
• Splashproof spring-loaded wheel encoder
• Eyelet for umbilical attachment

HSMT-X03 Kit Includes

• • Scanner frame
  • Three 300-mm (8 in.) frame bars
  • Two 200-mm (8 in.) frame bars
• Three additional 200-mm (8 in.) frame bars
• Two additional 125-mm (5 in.) frame bars
• Four magnetic wheels
• Splashproof spring-loaded wheel encoder
• 5-m encoder cable for OmniScan®
• Four metric/English rulers
• Water manifold
• Six 90º probe holder brackets
• Six spring-loaded arms (SLA)
• Six TOFD/PE 40 mm yokes
• Two PA 40 mm yokes
• Irrigation tubing and accessories
• Hard carrying case

Note: Umbilical cable, probes, and wedges are not included in the basic kit.

Options

Probes, Wedges, and Umbilical

Refer to tables on pages 2 and 3

Remote P/R Kit

Four-channel 40dB Remote Pulser/Receiver with LEMO connectors to amplify probe signal. The use of the Remote P/R and composite probes will enhance the S/N ratio in TOFD inspections.

Kit includes a Remote P/R, a bracket compatible with HSMT scanners, 4 2-in. LEMO to Microdot 90º cable.

Manual Water Pump Kit

Water pump is compatible with scanner umbilical cables. It can also be used with provided tubing. Includes tank, tubing, on-off and flow valves.

Laser Guide Kit

Battery-operated laser-guiding device for easier weld tracking.

Spring-Loaded Arm Kit

Set of two spring-loaded arms (SLA) with 90º brackets. SLA optional kit is required for simultaneous 8-probe scan.

TOFD/PE Yoke Kit

Set of two yokes to hold a pair of TOFD or conventional UT wedges (ST, SP and SCW series)

PA Yoke Kit

One yoke to hold phased array 40 mm wedge.

Hypertronics Connector Interface

Interface bracket between phased array probe with Hypertronics connector and umbilical cable with corresponding Hypertronics connector. Compatible with HSMT scanners.

Umbilical Cables for HSMT-X03 Scanner