Ultrasonic thickness gauging is not just limited to materials at normal (ambient) temperatures. The thickness of a part can be measured even when the surface temperature approaches 900 deg F (500 deg C). In metals, particularly, there may be circumstances when the thickness of the part needs to be measured before the part can be cooled down.
Ultrasonics has the advantage - just as at normal temperatures - that thickness measurements can be taken from one side of the hot part. Ultrasonics may be the preferred method of measurement even when both sides of the hot metal part are accessible. The reason is that ultrasonic thickness measurements can be made instantly and with very brief contact with the hot surface.
For the best calibrated accuracy, the effect of the higher temperature on the velocity of sound must be taken into account. Although change in sound velocity with temperature is much less in metals than in plastics, significant errors in measured thickness can result if sound velocity is not corrected.

Equipment: A major reason to classify hot metals separately is that when the temperature of a surface exceeds 120 deg F (50 deg C), Microscan contact transducers cannot be used because they will be damaged by thermal expansion effects. Consequently, gauges that exclusively utilize contact transducers cannot be used for making thickness measurements on hot surfaces.
Instead, we recommends the Model 35DL, which can be used with delay line transducers or immersion transducers. On hot surfaces delay line transducers must be used with High Temperature delay lines.
The thickness of hot corroded metal parts or parts with rough surfaces should be measured with the Model 37DL PLUS and a D790 or D791 dual transducer. The 37DL PLUS is a sophisticated corrosion gauges with internal data loggers and waveform displays that have practical features to provide excellent thickness measurement reliability on hot corroded metal pipes or tanks. For less challenging applications, the compact MG2 series of gages can also be used.

Products used for this application

35 Series
General purpose, lightweight Panametrics-NDT gauges feature optional live Waveform and Adjust Mode. 35DL and 35DL-HP have alphanumeric data logger.

MG2 Series
Pocket-sized, easy to use Panametrics-NDT corrosion gauges offer many measurement features such as B-pscan and optional A-scan. MG2-XT and MG2-DL offer Thru-Coat and Echo-to-Echo options to measure both coating and thickness.

37DL PLUS
Advanced Panametrics-NDT corrosion gauge with large A-scan display and sophisticated alphanumeric data logger. Features include Thru-Coat, Echo-to-Echo, B-scan acquisition, Emat, and optional Oxide/Scale measurement.

26MG
Basic gage combines simple operation and low cost. This Panametrics-NDT gauge has a variety of practical measurement features.