Nagy Frekvenciás Vizsgálófejek

Ultrahang

Contact transducers are available in frequencies up to 225 MHz. Performance is dependent on pulser/receiver and application. All transducers are manufactured on a special basis to customer specifications. Contact us to discuss applications.

High Frequency Transducers

High frequency transducers are single element contact or immersion transducers designed to produce frequencies of 20 MHz and greater.

Advantages:

Heavily damped broadband design provides excellent time resolution
Short wavelengths for superior flaw resolution capabilities
Focusing allows for very small beam diameters
Frequencies range from 20 MHz to 225 Mhz

High Frequency Contact

Permanent fused silica delay line allows for flaw evaluation, material analysis or thickness measurements using a direct contact testing method
Three different delay line configurations (BA, BB, BC) allow for various combinations of delay line echoes
Standard connector style is Right Angle Microdot^® (RM)

Freq	Nominal Element Size		Delay	Transducer Part Numbers
MHz	inches	mm	µsec
20	0.25	6	4.25	V212-BA-RM
	0.25	6	4.25	V212-BB-RM
	0.25	6	2.5	V212-BC-RM
30	0.25	6	4.25	V213-BA-RM
	0.25	6	4.25	V213-BB-RM
	0.25	6	2.5	V213-BC-RM
50	0.25	6	4.25	V214-BA-RM
	0.25	6	4.25	V214-BB-RM
	0.25	6	2.5	V214-BC-RM
	0.125	3	4.25	V215-BA-RM
	0.125	3	4.25	V215-BB-RM
	0.125	3	2.5	V215-BC-RM
75	0.25	6	2.5	V2022 (BC)
75	0.125	3	2.5	V2025 (BC)
100	0.125	3	4.25	V2054 (BA)
100	0.125	3	2.5	V2012 (BC)
125	0.125	3	2.5	V2062

Please contact us for transducers in higher frequencies.

Transducer Dimensions (in inches)
Delay Style	(A)	(B)	(C)
BA	0.72	0.81	1.00
BB	0.34	0.44	0.81
BC	0.34	0.44	0.63

High Frequency Standard Immersion Case

Permanent fused silica delay line
Focused units use an optical quality ground lens
F202 adaptor allows fixturing with a passive UHF connector and an active Microdot^® style connector (see page 38)
Combines high frequency with a small case design

Freq	Nominal Element Size		Delay	Focal Length		Transducer Part Numbers
MHz	inches	mm	µsec	inches	mm
20	0.25	6	4.25	flat		V354-SU
	0.25	6	2.5	0.75	19	V372-SU
	0.25	6	4.25	1.25	32	V373-SU
	0.25	6	4.25	2.00	51	V374-SU
30	0.25	6	4.25	flat		V356-SU
	0.25	6	2.25	0.75	19	V375-SU
	0.25	6	4.25	1.25	32	V376-SU
	0.25	6	4.25	2.00	51	V377-SU
50	0.25	6	4.25	flat		V358-SU

High Frequency SU/RM Immersion Case

Permanent fused silica delay with an optical quality ground lens provides a high degree of precision in beam alignment and focusing
Stainless steel case has a passive Straight UHF (SU) connector and an active Right Angle Microdot (RM) connector
Large cases allow for larger delay lines and decrease in delay reverberations and noise

Freq	Nominal Element Size		Delay	Focal Length		Transducer Part Numbers
MHz	inches	mm	µsec	inches	mm
50	0.25	6	19.5	0.50	13	V390-SU/RM
	0.25	6	19.5	0.75	19	V3192
	0.25	6	19.5	1.00	25	V3193
	0.25	6	19.5	1.75	45	V3409
	0.25	6	19.5	2.00	51	V3337
	0.25	6	9.4	0.20	5	V3330*
	0.125	3	19.5	0.50	13	V3332
75	0.25	6	19.5	0.50	13	V3320
75	0.25	6	19.5	0.75	19	V3349
90	0.25	6	19.5	0.50	13	V3512
100	0.25	6	19.5	0.50	13	V3194
	0.25	6	19.5	1.00	25	V3394
	0.25	6	9.4	0.20	5	V3534*
	0.125	3	10	0.25	6	V3346

*Transducers create surface waves in steel, titanium and other materials with similar velocities. Please contact us for higher frequency. Lightweight High Frequency transducers are an alternative to the SU/RM case style transducers. They offer a smaller case width and lighter weight without sacrificing performance.

Supporting Data

Questions?

Contact an Olympus Specialist

Nagy Frekvenciás Vizsgálófejek

Ultrahang

High Frequency Transducers

Advantages:

High Frequency Contact

High Frequency Standard Immersion Case

High Frequency SU/RM Immersion Case

公司

Alkalmazások

Támogatás

Teória

Ultrahangos Termékek

Távoli Vizuális Termékek

Örvényáramos Termékek

Nagysebességű Videókamerák