Sonde e trasduttori

Trasduttori e zoccoli conformi alla normativa dell'American Welding Society

  • Transducers and wedges meet or exceed the specifications as set forth by the AWS Code Section D1.1
  • Snail wedges use industry accepted hole spacing
  • Captive screws included with the transducer
  • Accupath style wedges marked with a five line graticule to assist in locating the beam exit point
Nominal
Element Size 		Freq. Transducer
Part Num* 		Snail Wedge
Part Num* 		Accupath Wedge
Part Num*
inches MHz ACCUSCAN CENTRASCAN
0.625 x 0.625 2.25 A430S-SB C430-SB ABWS-8 -X° ABWS-6-X°
0.625 x 0.75 2.25 A431S-SB C431-SB ABWS-8 -X° ABWS-6-X°
0.75 x 0.75 2.25 A432S-SB C432-SB ABWS-8 -X° ABWS-6-X°

* Wedges are available in standard refracted shear wave angles of 45°, 60° and 70° in steel. Please specify upon ordering.

Snail Wedges


Snail Wedge Dimensions*
(in inches)

(A)

(B) (C) (D)
45° 2.15 0.62 1.78 1.25
60° 1.91

0.65

1.81 1.25
70° 2.17 0.67 1.92 1.25


*Distance between screws (center to center) is 1.00".

Accupath Wedges


Accupath Wedge Dimensions*
(in inches)

(A)

(B) (C) (D)
45° 1.50 0.90 1.96 1.50
60° 1.68 0.79 2.05 1.50
70° 1.66 0.96 2.20 1.50


*Distance between screws (center to center) is 1.062".

Supporting Data
Questions?
Contact an Olympus NDT Specialist

Choose your language: English | français | 日本語 | 中文 | Español | Deutsch | čeština | Tiểng Việt | italiano | magyar
© 2007 Olympus NDT, All rights reserved. | Condizioni d'uso | Informativa sulla privacy