Advantages of Small-Footprint Probes
- Access to confined areas (A00 probe has an 8 8 mm footprint)
- Cable connector can come out from either the side or the top (A0 only).
- Special-design small-footprint wedge
- 10L16-A00 is used for aerospace scribe mark applications.
Advantages of Near-Wall Probes and Wedges
- Shortened dead zone at both ends (1.5 mm between center of first or last element and housing edge)
- Well suited for composite channel inspection
- Used for C-scan inspection of composites (delamination, disbonding, and porosity)
Probe Specifications and Dimensions
|
Part number
|
Frequency
(MHz)
|
Number of elements
|
Pitch
(mm)
|
Active
aperture (mm)
|
Elevation
(mm)
|
External dimensions
mm (in.)
| |
L
|
W
|
H
| |
Small-footprint probes
| |
10L16-A00
|
10.0
|
16
|
0.31
|
5.0
|
5.0
|
8 (0.31)
|
8 (0.31)
|
23 (0.90)
| |
5L10-A0-SIDE
|
5.0
|
10
|
0.60
|
6.0
|
6.0
|
13 (0.50)
|
10 (0.40)
|
23 (0.90)
| |
5L10-A0-TOP
|
5.0
|
10
|
0.60
|
6.0
|
6.0
|
13 (0.50)
|
10 (0.40)
|
23 (0.90)
| |
10L10-A0-SIDE
|
10.0
|
10
|
0.60
|
6.0
|
6.0
|
13 (0.50)
|
10 (0.40)
|
23 (0.90)
| |
10L10-A0-TOP
|
10.0
|
10
|
0.60
|
6.0
|
6.0
|
13 (0.50)
|
10 (0.40)
|
23 (0.90)
| |
Near-wall probes
| |
3.5L64-NW1
|
3.5
|
64
|
1.0
|
64.0
|
7.0
|
66 (2.60)
|
19 (0.75)
|
25 (0.98)
| |
5L64-NW1
|
5.0
|
64
|
1.0
|
64.0
|
7.0
|
66 (2.60)
|
19 (0.75)
|
25 (0.98)
| |
These probes come standard with an OmniScan® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. Note: Dimensions listed herein are approximate and are not to be used for design purposes.
|
|
|