Immersion probes are designed to be used with a water wedge or in an immersion tank when the test part is partially or wholly immersed. They are longitudinal wave probes that can be set up for refracted shear-wave inspection using a Rexolite® wedge.
Advantages
- Acoustic impedance matching to water
- Design allows fitting on water wedges for easier coupling on many surfaces and an adjustable water path (when the part to inspect cannot be immersed in a tank).
- Linear scanning allows coverage of 30 mm to 90 mm in one line, with very high accuracy.
- Corrosion-resistant stainless steel case
- Waterproof guaranteed up to 1 m (3.28 ft) underwater
Typical Applications
- Inspection of thin plate or tubing (steel, aluminum, or other)
- Composite inspection for delamination, disbonding, etc.
- Inline thickness gaging
- Automated scanning
Probe Specifications and Dimensions
|
Part Number
|
Freq
(MHz)
|
Number of elements
|
Pitch
(mm)
|
Active
aperture (mm)
|
Elevation
(mm)
|
External dimensions
mm (in.)
|
|
L
|
W
|
H
|
|
5L64-I1
|
5.0
|
64
|
0.60
|
38.4
|
10.0
|
50 (1.97)
|
19 (0.75)
|
25 (0.98)
|
|
10L64-I1
|
10.0
|
64
|
0.50
|
32.0
|
10.0
|
50 (1.97)
|
19 (0.75)
|
25 (0.98)
|
|
5L128-I2
|
5.0
|
128
|
0.60
|
76.8
|
10.0
|
83 (3.27)
|
21 (0.83)
|
35 (1.38)
|
|
10L128-I2
|
10.0
|
128
|
0.50
|
64.0
|
7.0
|
83 (3.27)
|
21 (0.83)
|
35 (1.38)
|
|
2.25L128-I3
|
2.25
|
128
|
0.75
|
96.0
|
12.0
|
102 (4.02)
|
21 (0.83)
|
35 (1.38)
|
|
5L128-I3
|
5.0
|
128
|
0.75
|
96.0
|
10.0
|
102 (4.02)
|
21 (0.83)
|
35 (1.38)
|
|
These probes come standard with an OmniScan® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. Note: Dimensions listed herein are approximate and are not to be used for design purposes.
|