Advantages
- Low-profile housing
- Front-exit cable to avoid interference with scanner probe holder
- Fits special PipeWIZARD® wedges designed for automated inspection of girth welds (sophisticated irrigation channels, locking carbide wear pins).
- Can be ordered with CE-certified Hypertronics™ connector
- Suitable for manual and automated inspection
Typical Applications
- Automated inspection of girth welds with PipeWIZARD systems
- Manual or automated inspection of thick welds
- Detection of flaws and sizing
- Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects
Probe Specifications and Dimensions
|
Part number
|
Frequency
(MHz)
|
Number of elements
|
Pitch
(mm)
|
Active
aperture (mm)
|
Elevation
(mm)
|
External dimensions
mm (in.)
| |
L
|
W
| |
5L60-PWZ1
|
5.0
|
60
|
1.0
|
60.0
|
10
|
68 (2.68)
|
26 (1.02)
| |
7.5L60-PWZ1
|
7.5
|
60
|
1.0
|
60.0
|
10
|
68 (2.68)
|
26 (1.02)
| |
5L48-PWZ2
|
5.0
|
48
|
1.0
|
48.0
|
10
|
56 (2.20)
|
26 (1.02)
| |
5L32-PWZ3
|
5.0
|
32
|
1.0
|
32.0
|
10
|
40 (1.58)
|
26 (1.02)
| |
7.5L32-PWZ3
|
7.5
|
32
|
1.0
|
32.0
|
10
|
40 (1.58)
|
26 (1.02)
| |
10L32-PWZ3
|
10.0
|
32
|
1.0
|
32.0
|
10
|
40 (1.58)
|
26 (1.02)
|
These probes come standard with an OmniScan® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.
When ordered as part of PipeWIZARD systems, these probes require CE Hypertronics™ connectors and a 0.6 m (2 ft) cable. Note: Dimensions listed herein are approximate and are not to be used for design purposes.
|
|
|