|
Pre-Service Weld Inspection Manual Scanner
The R/D Tech® HSMT-Flex is intended for the inspection of circumferential welds on pipes 4 in. OD and up using four probes. It can also be used on plates with up to eight probes.
The scanner offers an efficient way to make a complete manual weld inspection. It can perform TOFD, pulse-echo, and phased array inspection separately or all at once.
The basic configuation is intended for cons truction welding inspection. In order to be used in more restricted areas, the scanner can also be reconfigured with the provided short frame bars.
Features
- Folding frame to optimize probe contact on pipes
- Compact and versatile. The provided frame bars allow size customization.
- Full range of pulse-echo and TOFD probes and wedges, including the composite CentraScan™ series
- Can support up to 4 conventional or phased array probes on pipes
- Can support up to 8 conventional or phased array probes on flat surfaces.
- Light aluminum frame
- Fully adjustable probes positions
- Metric/English rulers on the scanner frame for easy probe separation measurement
- Probe holders are independently spring-loaded
- Splashproof spring-loaded wheel encoder
- Removable handles
- Eyelet for umbilical attachment
- The water manifold is integrated to the scanner frame
HSMT-Flex Kit Includes:
- Scanner frame
- Two additional 200-mm (8 in.) frame bars
- Four magnetic wheels
- Splashproof spring-loaded wheel encoder
- 5-m encoder cable for OmniScan®
- Four metric/English rulers
- Four 90º-probe holder brackets
- Four spring-loaded arms (SLA)
- Four TOFD/PE 40-mm yokes
- Two PA 40-mm yokes
- Irrigation tubing and accessories
- Hard carrying case
Note: Umbilical cable, probes, and wedges are not included in the basic kit.
Options
Probes, Wedges, and Umbilical
Remote P/R Kit
Four-channel 40dB Remote Pulser/Receiver with LEMO connectors to amplify probe signal. The use of the Remote P/R and composite probes enhances the S/N ratio in TOFD inspections.
Kit includes a Remote P/R, a bracket compatible with HSMT scanners, 4 2-in. LEMO to Microdot 90º cable.
Manual Water Pump Kit
Water pump is compatible with scanner umbilical cables. It can also be used with provided tubing. Includes tank, tubing, and Y splitters.
Laser Guide Kit
Battery-operated laser-guiding device for easier weld tracking.
Spring-Loaded Arm Kit
Set of two spring-loaded arms (SLA) with 90º brackets. SLA optional kit is required for simultaneous 8-probe scan.
TOFD/PE Yoke Kit
Set of two yokes to hold a pair of TOFD or conventional UT wedges (ST, SP and SCW series)
PA Yoke Kit
One yoke to hold phased array 40 mm wedge.
|