Angle beam probes are used with a wedge to transmit a refracted shear or longitudinal wave into a test piece. With their large apertures, deep penetration angle beam probes are designed for the inspection of thick, noisy, or highly attenuative material.
Advantages
- A wide selection of wedges is available to suit any angle beam application.
- Wave layers with acoustic adaptation to Rexolite®
- Captive anchoring screws are provided with the probe.
Typical Applications
A3, A4, and A5 probes
Deep penetration applications
- Thick plates and welds
- Forgings
- Noisy or granular material
Probe Specifications and Dimensions
Part number
|
Frequency
(MHz)
|
Number of elements
|
Pitch
(mm)
|
Active
aperture (mm)
|
Elevation
(mm)
|
External dimensions
mm (in.)
|
L
|
W
|
H
|
3.5L16-A3
|
3.5
|
16
|
1.60
|
25.6
|
16.0
|
36 (1.41)
|
36 (1.41)
|
25 (0.98)
|
5L16-A3
|
5.0
|
16
|
1.20
|
19.2
|
12.0
|
36 (1.41)
|
36 (1.41)
|
25 (0.98)
|
1.5L16-A4
|
1.5
|
16
|
2.80
|
44.8
|
26.0
|
57 (2.25)
|
46 (1.80)
|
30 (1.19)
|
2.25L16-A4
|
2.25
|
16
|
2.00
|
32.0
|
20.0
|
57 (2.25)
|
46 (1.80)
|
30 (1.19)
|
2.25L32-A5
|
2.25
|
32
|
0.75
|
24.0
|
24.0
|
29 (1.15)
|
43 (1.67)
|
24 (0.96)
|
5L32-A5
|
5.0
|
32
|
0.60
|
19.2
|
20.0
|
29 (1.15)
|
43 (1.67)
|
24 (0.96)
|
These probes come standard with an OmniScan® Connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths. Note: Dimensions listed herein are approximate and are not to be used for design purposes.
|